Nikon z7 manual download.Nikon Z7 User Manual

Looking for:

Nikon z7 manual download. Ever evolving. 

Click here to DOWNLOAD

     

NIKON Z7 PROFESSIONAL TECHNICAL MANUAL Pdf Download | ManualsLib.

 

Other products. Download Center Z 7. Z 7 Other products. Manuals Manuals Firmware Software. Title Language Size. Supplementary Firmware Update Manual English Reference Manual English Online Manual English - View.

User's Manual English for customers in the Americas 6. User's Manual English for customers in Europe 6. Network Guide English 2. Technical Guide Images Edition English 2. N-Log Specification Document English Firmware Manuals Firmware Software. Download firmware for Nikon digital products firmware being the built-in software that controls cameras and other devices.

Note that a card reader or other equipment may be required for some firmware updates. Instructions can be found on the download page. Although your device does not support this download service, it can be used to view download information. Title Version Released. Z 7 Firmware C:Ver. Software Manuals Firmware Software. Download software for Nikon products. NX Studio Full Ver. ViewNX-i Full Ver. Camera Control Pro 2 Full Ver. Be careful to prevent dust from entering the camera when the lens or body cap is removed, and be sure to remove the lens cap before taking pictures.

Page 53 Lenses with Retractable Barrels Lenses with retractable barrels must be extended before use. Rotate the lens zoom ring as shown until the lens clicks into the extended position. Detaching Lenses Be sure the camera is off when removing or exchanging lenses.

To remove the lens, press and hold the lens release button q while turning the lens clockwise w. Choose a language and set the camera clock. Turn the camera on. Rotate the power switch to ON. Select Language in the setup menu. Page 55 Select Time zone and date. Highlight Time zone and date and press 2. Choose a time zone. Select Time zone and choose your current time zone the display shows selected cities in the chosen zone and the difference between the time in the chosen zone and UTC.

Page 56 Choose a date format. To choose the order in which the year, month, and day are displayed, select Date format, then highlight the desired option and press J. Exit to shooting mode. Press the shutter-release button halfway to exit to shooting mode. Page 58 Ready the camera. Hold the handgrip in your right hand and cradle the camera body or lens with your left. Bring your elbows in against the sides of your chest.

Framing photos in the viewfinder Landscape wide orientation Portrait tall orientation Framing photos in the monitor Landscape wide orientation Portrait tall orientation Page 59 Focus. To focus, press the shutter-release button halfway or press the AF-ON button the AF-assist illuminator may light if the subject is poorly lit. If the camera is able to focus, the focus point will be displayed in green; otherwise, the focus point will flash red. Page 60 Shoot. Smoothly press the shutter-release button the rest of the way down to take the photograph you can also take a photograph by touching the monitor: touch your subject to focus and lift your finger to release the shutter.

The memory card access lamp will light while the photo is recorded to the memory card. The monitor and control panel will light. Select movie mode. Select b mode. Mode dial Pressing the mode dial lock release on top of the camera, rotate the mode Page 62 Start recording. Press the movie-record button to start recording.

While recording is in progress, the camera will display a recording indicator and the time remaining. The camera can be Movie-record button refocused at any time during Recording indicator recording by pressing the AF-ON button or tapping your subject in the display. Page 63 In movie mode, photos can be taken without interrupting recording by pressing the shutter-release button all the way down. A C icon will flash in the display when a photo is taken.

Taking Photos in Movie Mode Note that photos can be taken even when the subject is not in focus. Photos are recorded in finem-quality JPEG format at the dimensions currently selected for movie frame size. Note that the built-in microphone may record sounds made by the camera or lens during vibration reduction, autofocus, or changes to aperture.

Press the K button. A picture will appear in the display. View additional pictures. Press 4 or 2 to view additional pictures. When pictures are displayed in the monitor, you can view other pictures by flicking a finger left or right over the display. Page 66 The following operations can be performed: Operation Description Press 3 to pause playback. Press 4 to rewind, 2 to advance.

Note that pictures cannot be recovered once deleted. Display a picture you wish to delete. Page 68 52 Basic Photography and Playback Focus Focus can be adjusted automatically, manually, or using touch controls.

How the camera focuses is governed by your choice of focus mode and AF-area mode. Choosing a Focus Mode The focus mode controls how the camera focuses. Page 70 Option Description For moving subjects. The camera focuses continuously while the shutter-release button is pressed halfway; if the subject moves, the camera will AF-C Continuous predict the final distance to the subject and adjust focus as necessary. At default settings, the shutter can be released whether or not the subject is in focus release priority.

AF-area mode can be selected using the AF-area mode items in the i menu and the photo and movie shooting menus 0 , , At default settings, AF-area mode can also be selected by holding the Fn2 button and rotating the sub-command dial 0 The camera automatically detects the subject and selects the focus area. The focus point will change to a targeting reticule; position the reticule over the target and either press J again or press the AF-ON button to start tracking.

Touch the display to focus and lift your finger to release the shutter. Tap the icon shown in the illustration to choose the operation performed by tapping the display in shooting mode. Page 75 Taking Pictures Using Touch Shooting Options The shutter-release button can be used to focus and take pictures even when the W icon is displayed to show that touch shooting options are active.

Use the shutter-release button to take photographs in continuous shooting mode and during movie recording touch shooting options can be used only to take pictures one at a time in continuous shooting mode and cannot be used to take photographs Page Manual Focus Manual Focus Manual focus can be used when autofocus does not produce the desired results. Position the focus point over your subject and rotate the focus or control ring until the subject is in focus. For greater precision, press the X button to zoom in on the view through the lens.

Page 77 Lenses with Focus-Mode Selection Manual focus can be selected using the controls on the lens. Focal Plane Position To determine the distance between your subject and the camera, measure from the focal plane mark E on the 16 mm camera body.

The distance between the lens mounting flange and the focal plane is 16 mm 0. Page White Balance White Balance White balance ensures that white objects appear white, regardless of the color of the light source.

The default setting j is recommended with most light sources. If the desired results cannot be achieved with auto white balance, choose another option as described below. Eliminate warm color cast produced Keep white reduce warm colors by incandescent lighting.

Preserve warm color cast produced Keep warm lighting colors by incandescent lighting. Measure white balance for subject or light source press and hold Fn1 button to enter direct measurement mode, 0 , copy white balance Preset manual — Page 81 White Balance Fine-Tuning At settings other than Choose color temperature, white balance can be fine-tuned using the White balance items in the i menu and the photo and movie shooting menus 0 Color Temperature The perceived color of a light source varies with the viewer and other conditions.

Page Silent Photography Silent Photography To enable the electronic shutter and eliminate the noise and vibration caused by operation of the mechanical shutter, select On for Silent photography in the photo shooting menu. An icon is displayed while silent photography is in effect.

When the shutter is released, the display will briefly go dark to signal that a photo has be taken. Page Rating Pictures Rating Pictures Selected pictures can be rated or marked as candidates for later deletion. Protected pictures cannot be rated.

Select an image. Press the K button to start playback and display a picture you want to rate. Display the i menu. Note that this does prevent pictures being deleted when the memory card is formatted. Press the K button to start playback and display a picture you want to protect. Page Shooting Controls Shooting Controls This chapter describes controls that can be used during shooting. Page P: Programmed Auto P: Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture according to a built-in program to ensure optimal exposure in most situations.

Page A: Aperture-Priority Auto A: Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. To choose an aperture between the minimum and maximum values for the Monitor lens, rotate the sub-command dial.

Aperture can be locked at the selected setting 0 Page 88 Exposure Indicators The exposure indicators show whether the photograph would be under- or over-exposed at current settings. Depending on the option chosen for Custom Setting b1 EV steps for exposure cntrl , the amount of under- or overexposure is shown in increments of EV.

Rotate the mode dial to the desired mode. Page 90 Save user settings. Highlight Save settings and press J to assign the settings selected in Steps 1 and 2 to the mode dial position selected in Step 4.

Page Long Time-Exposures Mode M To prevent blur, mount the camera on a tripod or use an optional wireless remote controller Time only or remote cord. Nikon also recommends using a fully-charged battery or an optional AC adapter and power connector to prevent loss of power while the shutter is open.

Page 93 Choose a shutter speed. Rotate the main command dial to choose a shutter speed of Bulb or Time. Bulb Time Open the shutter. Bulb: After focusing, press the shutter-release button all the way down. Keep the shutter-release button pressed until the exposure is complete. The current setting is shown in the shooting display and control panel.

When auto ISO sensitivity control is enabled, ISO sensitivity will automatically be adjusted if optimal exposure cannot be achieved at the value selected with the S button and main command dial. Page The E Exposure Compensation Button The E Exposure Compensation Button In modes other than b, exposure compensation can be used to alter exposure from the value suggested by the camera, making pictures brighter or darker.

The current value for exposure compensation can be confirmed in the exposure indicator by pressing the E button. To choose a release mode, hold the c E button and rotate the main command dial. Press J when the desired option is highlighted; the selected option is indicated by icons in the shooting display and control panel. Page 99 Option Description While the shutter-release button is held down, the camera records up to about 9 frames per second.

Continuous H Focus and exposure are adjusted to maintain a high extended frame rate; optional flash units cannot be used. Flicker reduction has no effect.

Self-timer Take pictures with the self-timer 0 Page The Memory Buffer The camera is equipped with a memory buffer for temporary storage, allowing shooting to continue while photographs are being saved to the memory card.

The frame rate will drop when the buffer is full r The approximate number of images that can be stored in the buffer at current settings is shown in the exposure-count displays while the shutter-release button is pressed halfway.

Page The Self-Timer In movie mode, you can choose the operation performed when the shutter-release button is pressed 0 Regardless of the option selected, a maximum of 50 photos can be taken with each movie. Option Description The camera takes one photograph each time the Single frame shutter-release button is pressed.

Page Frame the photograph and focus. If AF-S is selected for focus mode, the timer will not start unless the camera is able to focus. Start the timer. Press the shutter-release button all the way down to start the timer. The self-timer lamp will start to flash, stopping two seconds before the photograph is taken. Focus-Point Selection Use the sub-selector to select the focus point in the shooting display. Focus- point selection is not available when auto-area AF is selected for AF-area mode 0 Set focus and exposure.

Position the subject in the selected focus point and press the shutter-release button halfway to set focus and exposure. Check that the focus point is displayed in green. Lock focus and exposure. Page Recompose the photograph and shoot. Focus will remain locked between shots if you keep the shutter-release button pressed halfway AF-S or keep the center of the sub-selector pressed, allowing several photographs in succession to be taken at the same focus setting.

Do not change the distance between the camera and the subject while focus lock is in effect. Page 90 Shooting Controls Page The I Button The i Button Pressing the i button displays the i menu: a menu of frequently-used settings for the current mode. Using the i Menu Press the i button to display the i menu. Highlight items using the multi selector and press J to view options, then highlight an option and press J to select it and return to the i menu to exit to the previous display without changing settings, press the i button.

Set Picture Control Option Description The camera automatically adjusts hues and tones based on the Standard Picture Control. The complexions of portrait subjects will appear Auto softer, and such elements as the foliage and sky in outdoor shots more vivid, than in pictures taken with the Standard Picture Control. Changes to settings can be previewed in the display 0 The current Picture Control is indicated by an icon in the display during shooting.

Quickly adjust levels for balanced Sharpening, Mid- range sharpening, and Clarity, or select A to let the Quick sharp camera adjust sharpening automatically. You can also make individual adjustments to the following parameters: Sharpening Page Filter Effects Choose from the following: Mode Setting Y yellow These options enhance contrast and can be used to tone down the brightness O orange of the sky in landscape photographs.

Orange produces more contrast than yellow, red more contrast than orange. R red G green Green softens skin tones and can be used for portraits. Option Option Auto Fluorescent Keep white reduce warm colors Sodium-vapor lamps Keep overall atmosphere Warm-white fluorescent Keep warm lighting colors White fluorescent Cool-white fluorescent Natural light auto Day white fluorescent Direct sunlight Daylight fluorescent If an option other than Choose color temperature is highlighted, fine-tuning options can be displayed by pressing 3.

Any changes to fine-tuning options can be previewed in the display. When Choose color temperature is highlighted, color temperature options can be viewed by pressing 3. Follow the steps below to measure a value for preset manual white balance. Display white balance presets. Page Measure white balance. To measure white balance, tap a white or gray object, or use the multi selector to position the r over a white or gray area of the display and either press J or press the shutter- release button all the way down note that the r cannot be repositioned when an optional flash unit is attached, in which case you will need to measure white balance with a white or gray object positioned in the center of the frame.

The options available depend on the mode selected with the mode dial. Page Metering Metering Metering determines how the camera sets exposure. The following options are available: Option Description The camera meters a wide area of the frame and sets exposure according to tone distribution, Matrix metering color, composition, and distance for results close to those seen by the naked eye. Enable Wi-Fi to establish wireless connections to smart phones or tablets running the SnapBridge app, which can then be used to download pictures from the camera or control the camera and take pictures remotely.

See the Network Guide and the SnapBridge app online help for more information. Use for high- contrast scenes, for example when photographing brightly lit outdoor scenery through a door or window or taking pictures of shaded subjects on a sunny day.

It is most effective when used with matrix metering. Page Release Mode Release Mode Choose the operation performed when the shutter-release button is pressed all the way down. The options available vary with the lens. Option Description Choose for enhanced vibration reduction when photographing static subjects. Normal Choose when photographing athletes and other Sport subjects that are moving rapidly and unpredictably.

Vibration reduction off. White Balance Adjust white balance for movie recording. The i Button Together, these options determine the maximum bit rate, as shown in the following table.

Slow-motion movies are recorded at 4 or 5 times the rated speed and play back at the rated speed. Page Microphone Sensitivity Microphone Sensitivity Turn the built-in or external microphones on or off or adjust microphone sensitivity.

Choose bA to adjust sensitivity automatically or Microphone off to turn sound recording off or adjust microphone sensitivity manually by choosing a value between b1 and b20 the higher the value, the higher the sensitivity.

The differences between the two formats are shown in the illustration. Page Metering Metering Choose how the camera sets exposure in movie mode. AF-Area Mode Choose how the camera selects the focus point when autofocus is enabled in movie mode. Option Option Single-point AF Page The i Button For more information, see the online manual or the Reference Manual, both from Nikon websites.

Selected Select date Page After burst, show defaults to Last image in burst First image in burst Choose whether the camera displays the first or the last photo in the burst Last image in burst after photos are taken in continuous release mode.

Storage folder Select the folder in which subsequent Rename pictures will be stored. Select folder by number Select folder from list File naming File naming Page White balance defaults to Auto Auto Match white balance to the light source.

Tap letters on the screen to cycle through the upper- and lower-case and symbol keyboards, tap the keyboard selection button or use the multi selector to highlight characters and press J to insert them at the current cursor Select according to the type Standard of scene or your creative intent.

Page Auto distortion control defaults to On Reduce barrel distortion when shooting with wide-angle lenses and reduce pin- cushion distortion when shooting with long lenses note that Off may not be available with some lenses.

Flicker reduction shooting defaults to Off Reduce the effects of flicker under fluorescent or mercury vapor lighting. Normal Sport Auto bracketing File naming Choose the three-letter prefix used in naming the image files in which movies are stored. Choose image area defaults to FX Choose the image area crop for Page Movie quality defaults to High quality High quality Choose movie quality.

Select Same as photo settings to use Auto the option currently selected for Standard photos. Select Same as photo High settings to use the option currently Normal selected for photos. Page Auto distortion control defaults to On Reduce barrel distortion when shooting with wide-angle lenses and reduce pin- cushion distortion when shooting with long lenses.

Flicker reduction defaults to Auto Auto Reduce flicker and banding caused by fluorescent or mercury-vapor lighting 50 Hz during movie recording. Page Electronic VR defaults to Off Choose whether to enable electronic vibration reduction in movie mode. Microphone sensitivity defaults to Auto Turn the built-in or external Auto microphones on or off or adjust Manual microphone sensitivity.

Microphone off Attenuator defaults to Disable Enable Reduce microphone gain and prevent audio distortion when recording If AF-ON only is selected, the camera will not focus when the shutter-release button is pressed halfway. Select Disable to prevent the Disable focus ring being used for focus in autofocus mode. Page c3 Power off delay Playback Choose how long the control panel and camera displays remain on when no Menus operations are performed.

Page d7 File number sequence defaults to On Choose how the camera assigns file numbers. Reset d8 Apply settings to live view defaults to On When On is selected, the effects of camera settings on color and brightness can be previewed in the viewfinder or monitor shooting display. Page Modeling flash defaults to On Choose On to preview lighting effects when using optional flash units compatible with the Nikon Creative Lighting System.